Product Details
* Mfr Part Number: PWLA8494GT
* FEAUTURES:
o Support for most NOSs
o Intel SingleDriver technology
o Backward compatibility with previous generations of Intel PRO/1000 Network Adapters
o Supports 64-bit PCI-X 1.0a or PCI 2.2 buses
o Remote management support (WfM, RIS, SNMP/DMI)
o IEEE 802.3ab compatibility
o Two Intel 82546GB Gigabit Controllers
o Intel 31154 133MHz PCI Bridge
o Built on Intel lead-free technology
* GENERAL:
o Connectors: 4x RJ-45
o IEEE standard/network topology: 10BASE-T, 100BASE-TX, 1000BASE-T
o Wiring: CAT-5, 4-pair
* ADAPTER PRODUCT FEATURES:
o Intel SingleDriver technology
o Plug and Play specification support: Standard
o Auto-negotiation, full-duplex capable
o Cable distance: 100 m
* NETWORK MANAGEMENT:
o Wired for Management (WfM) baseline v2.0 enabled for servers
o DMI 2.0 support, WMI & SNMP-manageable
o Offline diagnostics
o Dynamic cable diagnostics
o Intel Boot Agent
o ACPI power management
o Wake on LAN
o PXE 2.0
* NOS SOFTWARE SUPPORT:
o Windows Server 2003 and 2000
o Windows XP 32- and 64-bit editions
o Linux 2.4.x or later (32- and 64-bit)
o FreeBSD 4.x or later
o UnixWare 7.x, OpenUNIX 8.0 (ddi8)
o SunSoft Solaris 7, 8
o NetWare 5.1, 6.0, 6.5
* ADVANCED SOFTWARE FEATURES:
o Adapter Fault Tolerance
o Switch Fault Tolerance
o Adaptive Load Balancing
o fastt EtherChannel
o IEEE 802.3ad (Link Aggregation Control Protocol)
o Test Switch Configuration
o 802.1Q VLANs
o 802.3x Flow Control
o TCP Checksum Offload
o IEEE 802.1p
o TCP Segmentation/Large Send Offload
o Interrupt moderation
* TECHNICAL FEATURES:
o Controller: 2x Intel 82546GB
o Data rate(s) supported per port: 10, 100 and 1000 Mbps
o Bus type: PCI/PCI-X
o Bus width: 64-bit
o Bus speed: 66/100/133 MHz
o Onboard memory: 256 KB
o Interrupt levels: INTA, INTB, INTC, INTD
o IEEE support: 802.3ab
o Hardware certifications: FCC class B, CE, GOST, AS/NZ 3548, BSMI, ICES-003, VCCI
o Data transfer mode: Bus-master DMA
o Power consumption: 15.7W at +3.3VDC and 5VDC
* Dimensions (WxL): 6.6 x 4.2 inch / 10.7 x 16.5 cm